How to Create a Recaptcha config OpenBullet



Table of Contents

What is Recaptcha ?


reCAPTCHA is a provider of human verification system. Nulled uses a reCAPTCHA system for signing up, logining in and when it is getting DDOS attacked. This system will usually say «Are you a robot?» so we need to bypass that.

What are the Different Captcha Bypasses?

With OpenBullet we cannot use every captcha solver out there. 

Here are the ones we can use:

  • AntiCaptcha
  • AZCaptcha
  • CaptchasIO
  • DBC
  • DeCaptcher
  • ImageTypers
  • SolveRecaptcha
  • TwoCaptcha
  • RuCaptcha
  • CustomTwoCaptcha

How to setup your Recaptcha with OpenBullet?


  • Open OpenBullet go to settings
  • Once in settings make sure «RuriLib» is the tab you have open
  • Then go to «Captchas»
  • Now select the Decaptcha you want to use and fill the information in.

Finally, How to make the config:

Step One: Proxy Checker Block

1. So to get started go to the config section in OpenBullet. 
2. Once you get there press «NEW» and type in the name for your config and put the author as yourself.
3. Now you have made the config go to the stacker and press the «+» and add a «REQUEST» block
4. Now open up the site you are creating the config for (eg Spotify, PornHub) and copy the URL for the login page.
5. Now go back to OpenBullet and Paste the url in the box that says «URL:»

Step Two: ReCaptcha Block
1. Now press the + under the text «Current Stack» to add a new block, select the «RECAPTCHA» block.
2. Now open that block and in the «Variable Name:» type «Recaptcha»
3. Now in the «Page Url:» Section you want to put a link to the page where the Recaptcha is.
4. Now hit «Auto Sitekey» if this does not work you will need to do this manually

If you can’t generate a site key then follow this guide:

  • Go back to the page of the captcha
  • Press CTRL + U (it should open a new tab)
  • Now in that new tab press CTRL F and search «site»
  • Now look for the long list of letter of numbers (It should look like this: 6Kq5CQkTBBBBBKA-kgNm9mVwvtypDmCmgHFJYrF8)
Step Three: Post Request

1. Go back to the Captcha URL
2. Press «CTRL + Shift + I» at the same time then it should open up inspect element.
2. Now go to the «Network» tab 
4. Now do what the captcha says (BUT DO NOT PRESS SUBMIT)
5. Once you have done that press the little cross sign to clear network.
6. Now make sure that the Icon next to the cross is red and press «submit»
7. Now some tabs will popup in the network recordings. You want to look for a post request (This is usally either called «Login or «ReCaptcha» 
8. Now scroll down in that post request and look for either «Captcha response» or «g-recaptcha-response» if its there your in the right tab.
9. Now create a new «REQUEST» block in OpenBullet and you want to change the «Label» box to say «Login»
10. Now go back to the network tab we had open scroll to the top of the POST section and copy that URL
11. Now paste that URL in OpenBullet where it says «URL:»
12. Now change the «Method:» to POST using the drop down
13. Now go back to the Network tab we have open scroll down to «Form Data» and press view source.
14. Then you want to copy and paste that into a notepad file (its easier to edit)
15. Go into that notepad file delete everything after captcha up to & 
16. Now where that text was deleted you want to type
17. Now keep note pad open and look for the email or username you used to login in and replace it with (you always call it even if its a email
18. Now in that notepad look for the password you typed in and replace that with 19. Now copy and paste that into the «Post Data:» box in openbullet
20. Now go back to website look threw the Post data we got earlier for Content type and make sure in Open Bullet the content type is the same.
21. Now go back to the website look threw the post section for «User-Agent» and copy everything there (obviously not the part that says «User-Agent: «) and paste it in notepad.
22. Now look for «Origin» and «Referer» and copy both of them including the names.

Origin and referer should look like this when you post them in notepad. 



23. Now you want to grab the host as well from the website (include the word Host:) and paste it in notepad as well.
24. Now you need to copy «Host, Referer, Orgin» out of the notepad file and paste them under everything in the «Custom Headers:» section
25. Now copy the user agent from the notepad file and replace the preset that is in «Custom Headers:» by selecting over the default and using CTRL V to paste

Now we need to test this to do this go to log in openbullet and press start (don’t forget to type REAL account details) in the «Data» Section under debugger) This might be slower than us-all as someone on the site we setup earlier is filling out the captcha

Step Four: Key Check

1. Now go back to HTML view in OpenBullet and you want to make sure the website has logged you in.
2. Now you want to press the «+» under «Current Stack» and select the «KEY CHECK» block.
3. Now press the + next to the «Keychains:» and make sure it is green (if its red change the «Type:» to success)
5. Now go back to the log in the debugger and look for the captcha responce. 
6. Now copy the start of your captcha responce for me it is «g-recaptcha-response] =>» and you want to put it in the blank box 
7. Now its in the blank box you want to put a space after it and type
8. Now add another keychain by pressing the + next to «keychains: +» 
9. Now you want to swap this to a failure keychain to do this press on «SUCCESS» and swap it to «FAILURE»
10. Now swap the «Contains» to «DoesNotContain» and in the blank box copy and paste what we typed above.
11. Now go to The debugger press on «Data» press start again and it should give us a success and show us are recaptcha 

If you need a less complicated config to make check out my other guides:

Best Cracking Tools Providers For more CRACKING TOOLS content and info, join our Telegram and Discord servers

bullcrack.comPowered by Rock Convert